The Process of Tile Resurfacing

Read Time:1 Minute, 18 Second

Performing Tile Resurfacing is not a DIY project. In most cases, it requires professional help. Because it is in a very important area of a house, careful planning is required. During the process, the surface of the tiles must be completely cleaned. Then, an etching agent is applied to make them porous and allow the bonding agent to penetrate into the tiles. Next, the coating agent is sprayed evenly over each tile. Once this is done, a second coat may be applied. Leaving the coating on for a week will ensure the best result. Afterward, cleaning solutions must not be used on coated tiles to avoid damage.

The process of tile resurfacing is similar to that of a bath resurfacing project. The first step is cleaning the tile surface. Then, it is necessary to re-grout, filling in holes, and sanding it. Then, the resurfacing system is applied. The tiles are then heated to cure the coating. The second step is sealing the tiles with a grout sealer. Ultimately, this will increase the longevity of the new coating.

The process of tile resurfacing is similar to that of refinishing a bath. The first step involves cleaning the existing tile surfaces and re-grouting. This is done to minimize grout lines and ensure maximum adhesion. The second step involves applying two or four coats of a resurfacing system, which has the advantage of being able to hold a high gloss. In addition to being easier to clean, Tile Resurfacing can save a homeowner a lot of money over traditional replacements.